How do you fix a record

Repairing or touching up vinyl floors: the best tips

Vinyl floors are one of the most popular types of flooring. They are sturdy and versatile. Nevertheless, heavy stress and mishaps in the household leave their mark. We will show you how to remove small damage such as bubbles, holes and scratches.

Repairing or touching up vinyl floors: the best tips
Repairing or touching up vinyl floors: the best tips

Vinyl floors have a reputation for looking old-fashioned and man-made. But the PVC floor covering has long since developed into a popular floor covering. This is mainly due to the large selection of designs and its robustness. But despite their great resistance and durability, vinyl floors are not indestructible.

Over the years, heavy furniture leaves holes or scratches when dragged over parquet, laminate or vinyl. Poorly laid substrates or moisture also lead to dents, blisters and cause corners and edges to peel off. It is not necessary to replace the entire floor covering. You can easily repair and touch up vinyl floors.

Repair vinyl flooring and remove scratches

You can quickly repair scratches and sanding marks on your vinyl floor. First, clean the affected area thoroughly. For superficial damage, simply use a vinyl floor repair kit. These usually consist of a sponge or cloth as well as repair fluid or repair wax. Alternatively, you can use a special PU cleaner to repair scratches in the vinyl floor. This works like a polish.

With a repair kit, apply the repair fluid or wax to the scratches or sanding marks with a sponge or cloth. This will fill the damage and seal it.

Repair holes in the vinyl floor

If you discover a hole in your vinyl floor, you need to act quickly and repair the flooring. The hole is not only unsightly to look at, but also a gateway for mold. Cut out the affected area with a sharp knife and a metal splint. The latter is used to make a straight cut.

Put an adapted counterpart of your vinyl floor in the hole. In the best case scenario, you still have leftovers in the basement. If not, you will need to buy a new one from your hardware store or specialty store. Cover the edges of the patch with tape. Then fill the resulting seams with a cold welding agent and let it dry. The repair area is almost invisible afterwards.

Get quotes for a new vinyl floor here:

Eliminate bubbles in the vinyl floor

If the vinyl floor was not installed properly, bubbles will appear. However, they also occur when there is water damage. You can quickly repair the damage. However, you should first investigate where the damage is coming from. Water damage can lead to bigger problems.

Cut the blister open with a sharp knife and lift it up slightly. If there is moisture underneath, the subfloor must first dry before you can repair the vinyl floor. If it is dry, lift up the affected vinyl plank. To do this, bend the plank up at one corner with a craft knife. Then, lift it out of the glue bed.

If you want to use the plank again later, carefully pull it out of the bed. Otherwise it will deform and can no longer be used. Thoroughly clean the sub-floor and the vinyl floor plank. Then spread glue with a spatula and put the plank back in place. Use a clean cloth to remove any excess glue. Finally, smooth out the area with a rolling pin and weigh it down with a heavy object until the glue is dry.

Vinyl floor: re-glue corners and edges

If the corners and edges of the vinyl floor come loose, you have to re-glue them. Proceed in a similar way to mending blisters. The difference, however, is that you unfold the vinyl floor to a point where it is firmly attached to the floor. But do not kink the covering. Use a blow dryer to warm up old adhesive residues and remove them. Clean the surface, apply new adhesive and press the vinyl floor firmly back on.

Repair badly damaged vinyl flooring

If the vinyl floor is badly damaged, it is worthwhile to replace the floor covering over a large area. Cut the affected area straight and evenly with a sharp knife. Use the cut piece as a template for the replacement plank. So you have the right dimensions and find the right pattern if you have a decorative vinyl floor.

Remove the adhesive residue with a hair dryer and clean the surface thoroughly. Cut the replacement piece according to the template. Then apply the new adhesive evenly to the surface. Place the new vinyl floor plank and press firmly into place. Weigh down the area so that the floor does not bulge. Once the glue has dried, you can step back on the spot without any problems. With such large repairs it can happen that color differences show up on the vinyl floor. This is due to the UV change in the pavement. The colors adjust again over time.

Read more interesting articles here

Home remedies for minor damage in vinyl floors

But you can also use simple home remedies to repair minor damage to the vinyl floor. For fine scratches, for example, cooking oil is suitable. Simply polish out the damaged area. If you have a dark vinyl floor, use dark shoe polish and treat the scratch with it. If dents have formed in the floor, the blow dryer will help you. Warm up the place. If the ground is soft, roll a rolling pin over the pressure point.